Advertisement
Available languages
Available languages
ASSEMBLY INSTRUCTION:
IMPORTANT:
Assemble
the grill
on a flat
level surface. During
assembly, check the parts and hardware
for
correct
identification
against
the list and diagrams
on pages 12-16.
1. Assemble the casters as shown below. Make sure to attach
the locking
casters behind the counterweight.
®
2. Install left and right side panels as shown below.
2.1 Screw 4 AA screws into each side of the bottom
oanel. Leave the screw heads protruding
approximately
1/8-inch
above panel surface.
2.2 Insert the holes in left side panel base over the protruding
screws of the bottom
panel, and slide the side
panels to the back of bottom
panel.
2.3 Tighten the screws to secure the side panels in place.
The installation
of the right side panel is the same as
the left side panel.
19
Advertisement
