GE JM250DF1WW Owner's Manual page 18

Using the self-cleaning oven.
The oven door must be closed and all controls must be set correctly for the cycle to work properly.
£W
How to Delay the Start of Cleaning
Hoke sure the clock shows the correct time of
day.
%
[]
@
%
@
Pressthe SELFCLEAN pod.
Using the INCREASE or DECREASE pods,
enter the desired cleon time.
Pressthe DELAYSTARTpod. The earliest
start time you con set will uppeur in the
display.
Using the INCREASE or DECREASE pods,
enter the time of duy you wont the cleon
cycle to start.
Pressthe STARTpod.
The door locks automatically. The display will
show the start time. It will not be possible to
open the oven door until the temperature
drops below the lock temperature and the
LOCKEDDOOR light goes off.
The oven shuts off automatically when the
cleon cycle is complete.
When the LOCKEDDOOR light is off, open the
door.
After a Clean Cycle
You may notice some white ash in the oven.
Wipe it up with o damp cloth offer the oven
cools.
If white spots remuin, remove them with u
soap-filled steel wool pod and rinse thoroughly
with u vinegar und water mixture.
These deposits are usually a salt residue that ,
cannot be removed by the clean cycle.
If the oven is not clean after one clean cycle,
repeat the cycle.
You cannot set the oven for cooking until the
oven is cool enough for the door to unlock.
While the oven is self-cleaning, you con press
the CLOCK pod to display the time of day.
To return to the cleon countdown, press the
COOKINGTIME pod.
If the rocks become hard to slide, upply u
small amount of vegetable oil or cooking oil
to u paper towel and wipe the edges of the
oven rocks with the puper towel.
18