GE JM250DF1WW Owner's Manual page 11

GEAppliances.com
Cook and Hold
Your new control has a cook and hold feature
that keeps cooked foods warm for up to 5 hours
after the cooking function is finished.
This feature can be used only at the end of a
timed baking cycle which has an automatic
stop.
To activate this feature, follow the steps below.
[Z] Pressthe BAKE and BROILHI/LO pads at
the same time for 3 seconds until the
display shows SF.
[] Pressthe COOKINGTIME pad. The display
will show Hid OFF.
Pressthe COOKINGTIME pad again to
activate the feature. The display will show
Hid ON.
[] Pressthe STARTpad to activate the cook
and hold feature and leave the control set
in this special features mode.
A
Changing the Speed of the Increase or Decrease Pads
As you use the INCREASE or DECREASE pads
when setting a time or temperature, you may
notice the display changes slowly. This special
feature allows you to change the speed.
To set the speed you prefer, follow the steps
below.
rT] Press the BAKE and BROIL HI/LO pads at
the same time for 3 seconds until the
display shows SF.
[_ Press the INCREASE pad. The display will
show you a set speed between ! and 5.
r_ Press the INCREASE pad to increase the
speed up to the number 5.
Press the DECREASE pad to decrease the
speed down to the number 1.
r_ PressSTARTto activate the setting and
leave the control set in this special
features mode.
11