Subscribe to Our Youtube Channel
Related Manuals for Dux Endurance six
Summary of Contents for Dux Endurance six
- Page 3 The Endurance Six is pre-set at 50°C maximum water temperature.
- Page 18 The Endurance Six is pre-set at 50°C maximum water temperature to comply with AS3498-2009. Consequently, it does not require a tempering valve. If remote controllers are installed, the maximum temperature setting will still be 50°C.
- Page 19 The Endurance Six is pre-set at 50°C maximum water temperature to comply with AS3498-2009. Consequently, it does not require a tempering valve. If remote controllers are installed, the maximum temperature setting will still be 50°C.
-
Page 29: Commissioning The Water Heater
The water temperature will be delivered at 48-50℃ continuously. f ) If the water heater does not deliver water at this temperature contact you supplier or DUX Hot Water on 1300 365 115 for advice. PLEASE SEE REVERSE SIDE. -
Page 30: Installation Instructions
1. When connecting the hot water supply to the fixtures in the property a minimum of Four (4) Metres of pipework must be used between the outlet of the Dux En- durance water heater and the first tap and outlet. See Diagram below 1.
Need help?
Do you have a question about the Endurance six and is the answer not in the manual?
Questions and answers