Replacing The Hard Drive - Dell Latitude E4300 Service Manual

Hide thumbs Also See for Latitude E4300:
Table of Contents

Advertisement

Hard Drive: Dell Latitude E4300 Service Manual
1 M3 x 3-mm bezel screw 2 hard drive bezel
3 hard drive

Replacing the Hard Drive

CAUTION:
Before working inside the computer, read the safety information that shipped with the
computer. For additional safety best practices information, see the Regulatory Compliance Homepage on
www.dell.com at: www.dell.com/regulatory_compliance.
NOTICE:
Hard drives are extremely fragile. Exercise care when handling the hard drive.
NOTICE:
Use firm and even pressure to slide the hard drive into place. Excessive force may result in
damage to the connector.
NOTE:
This procedure assumes that you have completed the removal procedure first.
1. Secure the bezel to the hard drive with the M3 x 3-mm screw.
2. Slide the hard drive into the hard drive connector until the drive is fully seated.
3. Replace the two M3 x 3-mm screws securing the hard drive.
4. Follow the instructions in
5. Start your computer.
6. Install the operating system, drivers, and utilities for your computer, as needed. For more information, see the Setup
and Quick Reference Guide that shipped with your computer or on support.dell.com.
Back to Contents Page
file:///C|/Biz%20Client/2015/Lola%20(Defect%20Fix)/hdd.htm[5/25/2015 11:14:05 AM]
After Working on Your
Computer.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents