Safety Information; Warranty Information - Aqua Lung GORSKI G2000SS Technical Maintenance Manual

THE G2000SS DIVING HELMET SHOULD BE USED BY CERTIFIED AND PROPERLY TRAINED
DIVERS ONLY.
NoTe: Recommended air supply pressure 140 - 170 PSI Over Bottom Pressure (OBP).
WARNING:
• Supply pressure below 140 PSI OBP may lead to CO2 buildup inside
helmet.
• Supply pressure above 200 PSI OBP will cause the regulator to free flow.
WARNING: The G2000SS diving helmet is not cleaned or lubricated for
oxygen service.
CAUTION: The helmet should not be used for contaminated water diving (CWD)
when only a single exhaust is fitted. A double exhaust adapter kit is available
for CWD. When used for CWD with double exhaust fitted, the free flow valve
must be open and properly adjusted at all times throughout the dive, as posi-
tive pressure inside helmet must be maintained.
The manufacturer warrants every new helmet to be free from defects in workmanship for a
period of ninety (90) days from date of purchase.
Parts covered under the warranty:
• This warranty covers all metal parts.
Parts NoT covered under the warranty:
• This warranty does not cover any rubber parts, communications components, headliners,
or chrome plating. Due to the electrolytic nature of underwater cutting and welding,
chrome plating cannot be warranted when the diver engages in these activities.
The warranty becomes null and void if:
The product has been modified without consent of Aqua Lung America, Inc.
•
The product has been misused, damaged, put into a situation or service for which the
•
product is not intended or if the product has not been correctly maintained according to
the G2000SS Diving Helmet Technical Manual.
I. SAFETY INFORMATION
CONTAMINATED WATER DIVING
II. WARRANTY INFORMATION
5
the