Engaging The Parkingbrake - Craftsman T1000 Operator's Manual

Theenginewill automatically s hut off if the PTO (Blade Engage) l everis
movedintothe engaged (ON)positionwith the shift leverinReverse.
Ignition Switch
Theignition switchisactivated to startthe engine.Insertkeyintothe ignition
switchandturn clockwise to the START position.Release the keyinto the ON
positiononceenginehasfired.SeeFigure 8.
Tostopthe engine,turn the ignition keycounterclockwise to the OFF position. S ee
Figure 8.
Neverleave a running machine unattended. Always disengage PTO,
move shift lever intoneutral position, set parking brake, stop engine
land remove key to prevent un ntended start ng.
IMPORTANT: Prior t o operatingthe tractor,referto bothSafety InterlockSwitches
andStartingTheEngine inthe Operation sectionof thismanual f orfurther detailed
instructions.
Off
Off
Start
Setting the CuttingHeight
1. Select t he heightpositionof the cuttingdeckbyplacingthe decklift leverin
anyof thesixdifferentcutting heightnotches onthe rightsideof the fender.
Keephands and feet away from the discharge opening of the cutting
deck.
Starting the Engine
Donotoperate the tractor if the interlock systemismalfunctioning. This
systemwasdesignedfor yoursafetyand protection.
NOTE: R efer t o the Gasoline andOilfill-up instructions earlierinthissection.
I. Insertthe tractorkeyinto the ignition switch.
2. Place the PTO (Blade Engage) l everinthe disengaged (OFF) position.
3. Engage the tractor'sparkingbrake.
4. Activatethe chokecontrolbymovingthe throttle/chokeleverall the wayup
intothe chokeposition.
5. Turnthe ignitionkeyclockwise to the START p osition. A fterthe enginestarts,
release the key.It will returnto the ON(orNormal M owing)position.
DoNOThold the key in the STARTpositionfor longer thanten
secondsat a time. Doingso may causedamageto yourengine's
electricstarter.
6. Afterthe enginestarts,deactivate the chokecontrolandplacethethrottle
controlinthe FAST position.
NOTE: D oNOT leavethe chokecontrol o nwhileoperatingthe tractor.Doing sowill
resultina"rich"fuel mixtureandcause the engineto run poorly.
J
Figure 8
Engaging the ParkingBrake
Toengage the parking brake:
I. Fullydepress t he clutch-brake pedalandhold it down with yourfoot.
2. Movethe speed controlleverall the waydown andinto the parkingbrake
position.
3. Release t he dutch-brakepedal t o allowthe parkingbraketo engage.
Toreleasethe parking brake:
I. Depress t he clutch-brake pedalandmovethe speed controlleverout of the
parkingbrake positionandinto adesiredspeed.
14