Download  Print this page

Kenmore 60102 Use & Care Manual page 10

Hide thumbs

Advertisement

Vacation,
storage,
and moving care
Non=Use or Storage Care
Operate
your dryer only when you are at home.
If you will
be on vacation
or not using your dryer
for an extended
period
of time, you should:
1. Unplug
dryer or disconnect
power.
2. (For gas dryers
only): Close shutoff: valve to gas
supply
line.
3. Clean
lint screen. See "Cleaning
the Lint Screen."
Moving Care
For power
supply cord-connected
dryers:
I.
Unplug
the power
supply cord.
2. Make
sure leveling
legs are secure in dryer
base.
3. Use tape
to secure dryer door.
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before operating.
Failure to do so can result in death or electrical shock.
f
Changing
the drum light (on some models)
1. Unplug
dryer
or disconnect
power.
2. Open
the dryer door. Locate the light bulb cover on the
back wall of the dryer. Using a Phillips head
screw driver,
remove
the screw located
in the lower right=hand
corner
of the cover. Remove the cover.
3. Turn bulb counterclockwise.
Replace
the bulb with
a lO-watt
appliance
bulb only. Replace
the cover and
secure with the screw.
4. Plug in dryer or reconnect
power.
For direct-wired
dryers:
1. Turn off power
at fuse or breaker
box.
2. Disconnect
wiring.
3. Make
sure leveling
legs are secure in dryer
base.
4. Use tape
to secure dryer door.
For gas dryers:
1. Unplug
or disconnect
power
to dryer.
2. Close shutoff
valve to gas supply
line and disconnect.
3. Make
sure leveling legs are secure in dryer
base.
4. Use tape
to secure dryer door.
Reinstaillng the Dryer
Follow
the "installation
instructions" to locate, level_
and connect
the dryer.
10

Advertisement

loading

  Also See for Kenmore 60102