Auto Safety Shut-Off; Trouble Shooting; General Information - Bionaire BCH9212-CN Instruction Leaflet

Heater with advanced digital thermostat
Table of Contents

Advertisement

A U T O S A F E T Y S H U T- O F F

AUTO SAFETY SHUT-OFF

This heater is equipped with a technologically-advanced safety system that requires the user to reset the heater if there is a
potential overheat situation. When a potential overheat temperature is reached, the system will automatically shut the heater
off. It can only resume operation when the user resets the unit.
If the heater shuts down and the Power Light is flashing:
1. Stand the heater upright.
2. Unplug the heater and allow 30 minutes for the heater to cool down.
3. After 30 minutes plug the heater in and operate normally.
4. If the heater does not work normally, repeat steps 1, 2 and 3 again.
NOTE: If the heater is plugged in again and Power On/Off Button is pressed within the 30-minute cool down period, heater
will run at Max Heat setting, but shut down in 2 seconds with the Power Light flashing. Please repeat the above 4 steps to
reset the heater again and ensure to allow sufficient time for the thermostat to cool down.
FOR MODELS WITH TIP OVER PROTECTION
Tip Over Shut-Off:
When the unit is accidentally knocked over, it will instantly shut off and the Power Light will flash. The unit may also shut off
if it is moved or bumped. To reset, simply place the heater in an upright position, the Power Light will stop flashing and it will
operate normally.
NOTE: If unit does not turn on when placed in the upright position, press Power On/Off Button once and heater will resume
operation.

TROUBLE SHOOTING

General Information:

Environmental Factors - There are a number of factors that will affect your desired comfort level. These factors can include
insulation, open or drafty doors and windows, and outside temperature. Please check and take action if any of these potential
problems are affecting your heaters ability to adequately warm your room.
Supplemental Heat - Portable electric heaters are intended for supplemental heating of rooms to heat the room your in and
turn down the central heat thermostat. They are not intended to replace central heating systems.
Do NOT attempt to repair or adjust any electrical or mechanical functions on this heater. Doing so will void
warranty. The inside of the heater contains no user serviceable parts. All servicing should be performed by
qualified personnel only.
If you have any questions regarding your product or would like to learn more about other Bionaire
contact our Consumer Service Department at 1-800-253-2764 or visit our website at www.bionairecanada.com. For inquiries
regarding recycling and proper disposal of this product, please contact your local waste management facility.
products, please
®

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents