Tampering - Eneo PLS-5308 Full Manual

Part 2 - Remote Setup

Tampering

Select Tampering to configure tampering detection
event settings. With tampering detection event enabled,
a sudden change in the video, such as due to movement
of the camera or covering up of the lens, will be
assumed as an event.
• Camera Channels: Select which cameras to apply the
tampering to.
• Sensitivity: Define the tampering detection
sensitivity. Higher values will result in more sensitive
detection.
• Activation time: Specify how long tampering has
to be detected for it to be considered as an event.
Tampering detections that do not last for the
specified duration of time will not be considered as
events.
• Use Ignoring Time: Define the event ignoring time.
Tampering detections taking place during the defined
time range will not be assumed as events.
•
Event Action settings must be configured correctly
in order to perform event actions.
26