Table of Contents
Advertisement
Part 2 - Remote Setup
Date/Time
• Date/Time: Change the video encoder's date/time
settings and display formats and configure the time
zone and daylight saving time settings. Click Apply to
apply the changes right away.
• Time Sync
- Automatic Sync: Select to synchronize the system's
time with the time server at a specified interval.
Enter the time server's IP address or domain name
and then specify the interval. If the time server
is FEN-enabled, select the Use FEN option and
then enter the time server's name instead of its IP
address or domain name.
- Run as Server: Select to run the video encoder
as a time server. Other devices will then be able
to synchronize its time setting with this video
encoder's time setting.
If you wish to enter a domain name instead of an
IP address for the Time Server setting, DNS server
must be configured during Network setup. If you
wish to enter a server name instead of an IP address
or a domain name, the Use FEN option must be
enabled during Network setup.
18
User/Group
• User/Group: Change remote video encoder control
permission settings for users and user groups.
- Add Group: Add a new user group. Designate
a name for the group and then specify control
authorities.
- Add User: Add a new user. Designate a name for
the user, select which group to add the user to, and
then enter a connection password.
- Edit: Edit group authorities and/or user passwords.
Select a group or user and then click on the button.
- Remove: Delete groups or users. Select a group
of user you wish to delete and then click on the
button.
• User/Group settings can only be configured by
users belonging to the Administrator group.
• There is no default password for the Administrator
group's admin user.
• Group authorities that can be assigned are as
follows:
– Upgrade: Upgrade the system.
– Setup: Configure the system's settings.
– Color Control: Adjust the camera's brightness,
contrast, saturation, and hue settings.
– PTZ Control: Allows you to control the zoom of
the lens.
– System Check: View system event status.
Advertisement
Table of Contents
