Security - Eneo PLS-5308 Full Manual

Click Check to test the current port settings.
A confirmation message will appear if all the
selected ports are available for use. If not, a list of
recommended port numbers will be shown.
Click OK to use the recommended port numbers.
In a WAN environment, it is recommended that you
use the UPnP function if you record video by using
the FEN function or FEN connection is not smooth.
Otherwise, monitoring or recording might not be
smooth depending on the network environment.
Each port number must be unique.
Port numbers of the remote program must be updated
whenever the video encoder's port numbers are
changed.

Security

• SSL: Select this option to enable SSL (Secure Sockets
Layer). Enabling this option applies SSL protocol
protection on data transmitted out. However,
programs and systems that do not support SSL
will not be able to connect to the video encoder. If
this option has been changed, Remote Setup will
terminate after applying the current settings.
• Enabling the SSL option may place a greater load
on the external system, depending on the level of
security being used.
• This product contains software developed by Open
SSL Project for use in Open SSL Toolkit. (http://www.
openssl.org/)
Part 2 - Remote Setup
21