Table of Contents
Advertisement
Part 1 – Introduction
Accessories
Upon unpacking the product, check the contents inside to ensure that all the following contents are included.
• PLS-53xx Video Encoder
• Operation Manual (This document)
• Installation CD and Manual
Overview
Front Panel
3
Power LED
1
1 Power LED
Displays system operating status
2 Network LED
Displays network connection status
LED Status Indications
LED
Power LED
Network LED
3 Factory Reset Switch
Use to return all settings to the original factory settings. Connect the power and poke a straightened paperclip into
the factory reset switch hole. Hold the reset switch until the encoder's internal buzzer sounds twice. Release the
reset switch, and all of the encoder's settings are now at the original settings it had when it left the factory.
•
10
1
Network LED
2
Status
Off
No power connection
Blinking
System booting or upgrading
On
System operating
Blinking
Normal network connection
2
Factory Reset Switch
3
Description
Advertisement
Table of Contents
