Video Loss - Eneo PLS-5308 Full Manual

detection event.
• Motion Zone: Click Setup and define the motion
zone using blocks.
(Select)/ (Unselect): Enable/disable motion
-
detection.
(Single Block): Select/unselect motion
-
detection blocks individually.
(Zone): Select/unselect multiple motion
-
detection blocks.
(All): Select/unselect all motion detection blocks.
-
• Motion Ignoring Interval: With Motion Ignoring
Interval configured, no event log or notification is
generated for motions detected during a period of
time following a motion detection event.
• Daytime: Specify when daytime starts and ends. All
other times will be assumed as nighttime.

Video Loss

Select Video Loss to configure video loss event settings.
With video loss event enabled, video loss will be
assumed as an event.
• Camera Channels: Select which cameras to apply the
video loss to.
• Ignore interval: With Ignore interval configured, no
event log or notification is generated for video loss
taking place during a period of time following a video
loss event.
• Use Ignoring Time: Define the event ignoring time.
Video loss taking place during the defined time range
will not be assumed as events.
Event Action settings must be configured correctly
in order to perform event actions.
Part 2 - Remote Setup
25