Pro-Form Thinline Prodesk 831.24942.0 User Manual page 7

ASSEMBLY
Assembly requires two persons.
Place all parts in a cleared area and remove the
packing materials. Do not dispose of the packing
materials until you finish all assembly steps.
After shipping, there may be an oily substance
on the exterior of the treadmill. This is normal. If
there is an oily substance on the treadmill, wipe
it off with a soft cloth and a mild, non-abrasive
cleaner.
Left parts are marked "L" or "Left" and right parts
are marked "R" or "Right."
Assembly requires the following tools:
the included hex key
To avoid damaging parts, do not use power tools.
,
Go to www.proformservice.com/registration
on your computer and register your product.
• activates your warranty
• saves you time if you ever need to contact
Customer Care
• allows us to notify you of upgrades and offers
Note: If you do not have Internet access, call
1-888-533-1333 and register your product.
2. Make sure that the power cord is unplugged.
Remove the 5/16"x 1/2" Screws (1) and the
5/16" Star Washers (32) from the left and right
Extension Legs (94). Save the Screws and the
Star Washers.
2
94
7