Advertisement
Setting Oven
Controls
Restoring
Factory
Default
Settings
Your appliance
is programmed
with
default
control settings.
Over time, users may make changes
to these settings.
The
following
options
have settings
that can be modified
and may
have been changed
since the appliance
was new:
•
12 or 24 hour display
mode
•
Continuous
bake or 12 Hour Energy
Savings
mode
•
Silent or audible
control
•
Oven temperature
display
(Fahrenheit
or Celsius)
•
Oven temperature
adjustments
(offsets)
Important:
If you choose to restore factory
default
settings, all
of the listed user preferences
will be restored
to their original
settings
(factory
default).
To restore oven control to factory
default
settings:
1.
When
the oven is in idle and no cooking
function
is in oper-
ation,
press and hold the 7 key until the acceptance
tone
sounds (about
6 seconds)
2.
Press START. The control
is now reset to default
settings.
Adjusting Oven Temperature
The temperature
in the oven is pre-set at the factory.
Before
adjusting,
be sure to follow
recipe
times and temperatures.
Test
a recipe
by using a temperature
setting
higher
or lower than the
recommended
temperature.
The baking
results should
help you
to decide
how much of an adjustment
is needed.
Important:
Do not use thermometers
such as those found
in
grocery
stores to check
the temperature
settings inside the oven.
These thermometers
may display
temperatures
that vary greatly
from the actual
temperature.
If you think the oven is cooking
too hot or too cool for the
temperature
you select, you can adjust the actual
oven tempera-
ture to be 35°F (19°C) more or 35°F less than the default
setting
of O.
To adjust the oven temperature
higher
by 30°:
1.
Press Broil for 6 seconds.
UPO 0 will appear
in the display.
2.
Press the numeric
keys 30.
3.
Press ('_
to accept
the temperature
change
and the
v
display
will return to the time of day. Press STOP to reject
the change
if necessary.
To adjust the oven temperature
lower by 30°:
1.
Press Broil for 6 seconds.
UPO 0 will appear
in the display.
2.
Press the numeric
keys 30.
3.
Press Self Clean to change the 30 to - 30.
4.
Press(_
to accept
the temperature
change
and the
display
will return to the time of day.
5.
Press STOP to reject
the change
if necessary.
25
Advertisement
