Advertisement
Setting Oven
Controls
Setting
Oven
Timer
The Timer ON/OFF
controls the timer and serves as an extra
timer that will beep
when the set time
has run out. It does not
start or stop cooking.
The timer
feature
can be used during
any
of the other oven control
functions,
except
self clean and
Sabbath.
To set Timer for 5 minutes:
1.
Press Timer ON/OFF.
When
dashes
appear
in the display
the number 5 key and press (sT_.
The time will begin
press
to count down.
Note:
If the start key is not pressed timer
will return to time of
day after
25 seconds.
Figure 14: Display
showing dashes (left) and timer
ready
to
accept
desired
time
2.
When
timer
runs out, End and TIMER show in display.
The
clock will beep three times every few seconds
until Timer
ON/OFF
is pressed.
Press Timer ON/OFF
to cancel
the
timer at any time.
Setting
Oven
Lock
The o_ controls the oven lock. The oven lock automatically
locks
LOCK
the oven door and prevents
the locked
oven from
being turned
on. It does not disable
the clock, timer, or the interior
oven lights.
The ovens can be locked
individually.
To activate
the Oven Lock feature:
1.
Select Upper
or Lower Oven
first.
2.
Press and hold
o_N for 3 seconds.
LOCK
3.
After 3 seconds,
DOOR,
LOCKED
will flash and Loc will
appear
in the display.
Once the oven door is locked
the DOOR
and LOCKED
indicator
will stop flashing
and remain
in the display.
Allow
15 seconds for
the oven door to lock.
To reactivate
normal oven operation
by unlocking door:
1.
Press and hold o_N for 3 seconds.
Loc will disappear
from
LOCK
the display.
DOOR
and LOCKED
will flash in the display
until the door
has completely
unlocked
and the oven will be
operational.
Note:
Because the oven lockout
can be set for one oven or two,
an unlocked
oven may be used when the other is locked.
Setting Silent Control Operation
The Delay Start and Self Clean
keys control
the silent control
operation
feature.
The silent control
operation
feature
allows the
oven control
to be operated
without
sounds or beeps whenever
necessary.
If desired
the control
can be programmed
for silent
operation
and later
returned
to operating
with all the normal
sounds and beeps.
To change
from normal
sound to silent operation:
1.
Press and hold Delay Start for 6 seconds.
The display
will
show dashes
and then change
to bEEP ON
in the display.
Figure 15: Control
setting for audible
operation
2.
Press Self Clean to switch
between
normal
sound operation
and silent mode (beep
off).
Figure 16: Control
setting
for silent operation
_
to accept
the change
or press _
to reject
3.
Press
the
change.
Note: The control
will always
beep at the end of a timer
and will
beep when a set temperature
has been reached,
even if the
control
is set to silent operation.
16
Advertisement
