Advertisement
Setting Oven
Controls
Setting
the Clock
Q
is used to set the clock.
The clock
may be set for 12 or 24
CLOCK
hour time of day operation.
The clock
has been preset
at the
factory
for the 12 hour operation.
When
the range is first
plugged
in, or when the power
supply
to the range has been
interrupted,
the time in the display
will flash. Press (_.
The
display
will stop flashing.
Example
- setting the clock for 1:30:
1.
Press Q
. CLO will appear
in the display.
CLOCK
2.
Press 1 3 0 keys to set time of day. Press
3.
Time of day will now appear
in the display.
Changing
Between
12 or 24 Hour
Time
of Day
Display
1.
Press and hold
Q
until 12 Hr or 24 Hr appears
in the
CLOCK
display.
2.
Press Self Clean
to switch
between
the 12 and 24 hour time
of day displays.
The display
will show either
12Hr of 24Hr.
Figure 11: Display
showing norma 12 hour clock setting
Figure 12: Display
showing 24 hour clock
setting
3.
Press _To
accept
the change
or press_to
reject.
4.
Reset the correct
time as prescribed
in Setting the Clock
above.
Note: If the 24 hour time of day was selected,
the clock will now
display
time from 0:00
through
23:59
hours.
Setting
Continuous
Bake or 12 Hour
Energy
Saving
The Timer ON/OFF
and Self Clean
keys control the continuous
bake or 12 hour energy
saving
features.
The oven control
has a
factory
preset 12 hour energy
saving feature
that shuts off the
oven control
if left on for more than
11 hours and 59 minutes.
The oven can be programed
to override
this feature
for contin-
uous baking.
To set the continuous bake or 12 hour energy saving feature:
1.
Press and hold Timer ON/OFF
for about
7 seconds.
The
dashes will change
to show either
12Hr OFF or Stay On in
the display
and the control
will beep once.
Figure 13: Display showing 12 hour energy saving (top) and
display
showing
continuous
operation
that overrides
energy
saving
feature
(bottom)
2.
Press Self Clean to switch
between
the 12 hr energy
saving
and continuous
bake features.
Note: 12 Hr OFF indicates
the control
is set for the 12 hour
energy
saving mode.
Stay On indicates
the control
is set for the
continuous
bake mode.
3.
Press _
to accept
your selection
and the display
will
return to show the time of day.
To Set Add 1 Minute
The Add
1 Minute
key is used to add 1 minute to an active
timer.
If the timer
is not active
and Add 1 Minute
is pressed, the timer
will turn on and begin counting
down from 1 minute. This feature
will add 1 minute with each
press of the key.
15
Advertisement
