Adjusting The Iris Manually; Wind Cut - Panasonic PV-DV103-K Operating Instructions Manual

Palmcorder
Table of Contents

Advertisement

Adjusting the Iris Manually

Normally, the Palmcorder adjusts the
exposure automatically. However, when the
background is extremely bright, or when the
subject is backlit, you can compensate by
adjusting the Iris manually.
3, 4
JOG KEY
1
POWER
2
AUTO/MANUAL
EVF/LCD

WIND CUT

You can reduce sound distortion caused by
wind hitting the microphone.
3, 4
JOG KEY
1
POWER
2
MENU
5
REC/PAUSE
DV103-K.p26-29.p65
Advanced Settings
1
Set POWER to CAMERA.
2
Press AUTO/MANUAL so that the
"MNL" indication appears in the EVF or
the LCD monitor.
3
Press JOG KEY repeatedly so that
Iris setting indication appears in the
EVF or the LCD monitor.
4
Rotate JOG KEY to adjust the iris;
• When a value closer to "CLOSE" is
selected, the image becomes darker.
• When a value closer to "OP+18dB" is
selected, the image becomes
brighter.
• Press AUTO/MANUAL to cancel the
setting.
Note
• The value to which +dB is attached
indicates a gain value. If this value is too
large, the quality of the image
deteriorates.
• Depending on ZOOM magnification, the
iris value may not be displayed correctly.
• If you are using Program AE mode, you
cannot adjust the iris. If the iris is adjusted
Iris
manually, the above modes will be
Setting
cancelled.
1
Set POWER to CAMERA.
2
Press MENU to display the CAMERA
FUNCTIONS menu screen.
3
Rotate JOG KEY to select
RECORDING SETUP
JOG KEY to display the RECORDING
SETUP menu screen.
4
Rotate JOG KEY to select
CUT
select ON.
• Press MENU to exit.
• "WIND CUT" will appear in the EVF
or LCD monitor.
5
Start recording.
29
, then press
WIND
, and then press JOG KEY to
2003/06/11, 13:18
29

Advertisement

Table of Contents
loading

Table of Contents