Panasonic PV-DV103-K Operating Instructions Manual page 60

MENU OSD
11
12
13
14
15
16
17
18
19
20
21
11 DATE/TIME (p. 63)
The date and time can be set and
displayed on the screen.
C. DISPLAY (p. 64)
12
To select the desired type of counter
indication displayed on the LCD
Monitor or in the viewfinder.
13 C. RESET (p. 64)
Setting to ON resets the counter to
zero.
DISPLAY (p. 64)
14
To select the desired type of display
changes to all function display, Partial
display, and Minimum display.
60
DV103-K.p58-60.p65
15 LCD/EVF SETUP (p. 19)
Setting to ON displays the menu for
adjusting the LCD brightness, colour
level, and the EVF brightness.
REMOTE (p.
16
VCR1: To receive signals from the
VCR2: To receive signals from
OFF:
BEEP SOUND
17
Set to ON to hear a beep when
starting and stopping camera
recording or when unusual conditions
occur. To cancel the beep, set to
OFF.
Palmcorder will beep:
Once when you start recording
Twice when you stop recording
Repeatedly when warning of
unusual conditions. (p. 57)
SHTR EFFECT (p. 20)
18
When set to ON, still pictures taken in
the PhotoShot mode are recorded
with a visual shutter effect and click
sound.
CLOCK SET (p. 14)
19
When set to ON, the date and time
can be set on the screen.
SELF REC (p. 22)
20
NORMAL: During self-recording, the
picture on the LCD Monitor is the
same as it will be recorded.
MIRROR: During self-recording, the
picture on the LCD Monitor is
horizontally reversed.
DEMO MODE (p. 11)
21
When set to ON, Self Demo starts.
60
10)ly
Remote Control, set to VCR1.
the Remote Control, set to
VCR2.
To prevent reception of
signals from the Remote
Control.
2003/06/11, 13:19