Panasonic PV-DV103-K Operating Instructions Manual page 8

Before Using
Using Built-in LED Light
To brighten the natural colours in a scene.
GAIN UP works together with the LED Light
to enhance the light's brightness.
Note
• Use LED Light for recording subjects
1.5 m (4.9 feet) away or closer.
Press LIGHT
Press LIGHT
Press
LIGHT
1, 2, 3
LIGHT
8
DV103-K.p 5-8.p65
Before you begin
• Connect the Palmcorder to a power
source. (pp. 14, 15)
• Set POWER to CAMERA.
1
1
Press LIGHT. (Mode
• LED Light and GAIN UP turn ON.
LED Light ON
• GAIN UP ON will be brighter than
GAIN UP ON
when only LED Light is ON, however,
ghost images will appear.
2
2
Press LIGHT. (Mode
• GAIN UP turns OFF.
LED Light ON
• To eliminate ghost images, use this
GAIN UP OFF
mode.
3
3 Press LIGHT. (Mode
• LED Light turns OFF.
LED Light OFF
• Pressing LIGHT again returns to
GAIN UP OFF
Note
• Using Light reduces battery time.
• Set LIGHT to OFF when not in use.
• Do not look directly into the light.
• If the LED Light is used with a Conversion
Lens attached, a slight vignetting
(darkening around edges) effect occurs
on the screen.
• Using MagicPix at the same time will
Built-in LED
make conditions even brighter. (p. 39)
Light
8
1
)
2
)
3
)
1
.
2003/06/11, 13:18