Table of Contents
Advertisement
Advanced Settings
White Balance
Auto White Balance ("AWB") automatically
maintains optimum colour balance in most
lighting conditions. However, when using
Digital Functions, etc., you may get better
results by using the manual adjustment.
3, 4, A, B
JOG KEY
1
POWER
2
AUTO/MANUAL
Mode
Description
Automatically maintains optimum
AWB
colour balance in most lighting
conditions.
When the source illumination is a
halogen lamp.
When shooting outdoors on a
sunny day.
The White Balance setting that
was previously set manually.
Note
*
• When ZOOM is set to 10X or
higher, White Balance cannot be
adjusted.
26
DV103-K.p26-29.p65
1
Set POWER to CAMERA.
2
Press AUTO/MANUAL so that the
"MNL" indication appears in the EVF
or the LCD monitor.
3
Press JOG KEY repeatedly until
"AWB" appears in the EVF or LCD
monitor.
4
Rotate JOG KEY to select other
modes. (See mode chart at left.)
• Press AUTO/MANUAL to cancel the
setting.
* For manual White Balance
adjustment:
A.
Rotate JOG KEY to select "
B.
Point the Palmcorder at a white
object (full-screen) and hold JOG
KEY down until "
flashing.
• If "
Palmcorder is turned on, the previous
manual White Balance setting is in
effect.
In the following cases, the "
indication flashes:
• The flashing indicates that the
previously adjusted White Balance
setting is still in effect. This setting will
be in effect until White Balance is
adjusted again.
• Correct White Balance may not be
attainable manually in poor lighting.
Note
• DISPLAY must be set to ALL for MF, AE,
W.BALANCE, HIGH SPEED SHUTTER,
or IRIS to be displayed on the LCD or
EVF.
• While "GAIN UP" or "MAGICPIX" is
displayed on the LCD or EVF, Manual
White Balance is inoperable.
26
" .
" indication stops
" indication flashes when the
"
2003/06/11, 13:18
Advertisement
Table of Contents
