Advertisement
When the tool is not to be used for an extended period of time, lubricate the tool using pneumatic
tool oil and store the tool in a safe place. Avoid exposure to direct sunlight and/or a humid or hot
environment.
Maintenance of compressor, air set and air hose
After operation, always drain the compressor tank and the air filter. If moisture is allowed to enter the
tool, it may result in poor performance and possible tool failure.
I
1
I
Drain cock
7
Air
Oiler
- /
Check regularly to see if there is sufficient pneumatic oil
in the oiler of the air set. Failure to maintain sufficient
lubrication will cause O-rings to wear quickly.
Pneumatic
0 1 1
I
Advertisement
