Advertisement
Do
not leave the loaded tool or the air compressor
under pressure for a long time out in the sun. Be sure
that dust, sand, chips and foreign matter will not
enter the tool in the place where you leave
it
setting.
*Do not point the ejection port at anyone in the
When the air hose is connected, do not carry the
tool with your finger on the trigger or hand
it
t o
someone in this condition. Accidental firing can be
extremely dangerous.
Handle the tool carefully as there is high pressure
inside the tool that can be dangerous if a crack
is
caused by rough handling (dropping or striking).
Do
not attempt t o carve or engrave on the tool.
8
Advertisement
