Download Print this page

Makita AN611 Instruction Manual page 9

Construction coil nailer
Hide thumbs Also See for AN611:

Advertisement

Stop nailing operations immediately if you notice
something wrong or out
of
the ordinary with the
tool.
.Always disconnect the air hose and remove all of
the nails:
1. When unattended.
2. Before performing any maintenance or repair.
3.
Before cleaning a jam.
4. Before moving the tool t o a new location.
Perform cleaning and maintenance right after finish-
ing the job. Keep the tool in tip-top condition.
Lubricate moving parts to prevent rusting and
minimize friction related wear. Wipe off all dust from
the parts.
When not operating the tool, always lock the trigger
by turning the change lever to the LOCK position.
. .
Change lever

Advertisement

loading