Christie LW650 User Manual page 18

3.1 Configuring and controlling the projector via a web browser (continued)
Item
SNMP Port
Port open
Trap address
SMTP Port
Port open
Network Bridge Port
Port Number
Daisy Chain Port
Port Number
Click [Apply] button to save the settings.
NOTE
• The new configuration settings are activated after restarting the
network connection. When the configuration settings are changed, you must
restart the network connection. You can restart the network connection by
clicking [Network Restart] on the main menu.
LIT MAN USR LW650/LS+700/LX750/LW720 NTWK GUID
3. Management with Web browser software
Configures the SNMP port.
Click the [Enable] check box to use SNMP.
Configures the destination of the SNMP Trap in IP format.
• The address allows not only IP address but also domain
name if the valid DNS server is setup in the Network
Settings. The maximum length of host or domain name is up
to 255 characters.
Configures the SMTP port.
Click the [Enable] check box to use the e-mail function.
Configures the Bridge port number.
Input the port number. Any number between 1024 and 65535
can be set up. It is set to 9717 as the default setting.
Configures the Daisy Chain port number.
Input the port number. Any number between 1024 and 65535
can be set up. It is set to 9718 as the default setting.
17
Description
020-000160-02 Rev.1 (06-2013)