Kranzle 11/130 Operating Maintenance Installation page 5

Spray pipe with spray gun
The spray gun only allows the machine to
be operated when the safety trigger is
pulled.
The spray gun can be used when the safety
trigger is pulled. The machine is started and
the liquid transported to the nozzle. Spray
pressure builds up and quickly reaches the selected operating pressure.
When the trigger is released the gun is closed, which prevents any further liquid
from coming out of the spray pipe and the motor is stopped.
After completing work with your Kränzle therm CA, or if work is
interrupted, the safety catch (1) must be applied. This makes it
impossible to press the trigger by accident.
The spray gun is a safety device. Repairs may only
be performed by trained personnel. If spare parts
are required, use only those approved by the maker.
Thermostat
The thermostat with rotary control
switch controls the temperature
of the spray water.
Use the rotary control switch to adjust
the desired water temperature.
High pressure hose and spray equipment
The high pressure hose and spray equipment supplied with the machine are made
of high quality material specially adapted for the operating conditions of the
machine, and are properly marked.
If spare parts are required, only properly marked components
approved by the maker should be used. High pressure hoses and
spray equipment must be connected so that they are pressure-
tight. The high pressure hoses should not be driven over, pulled
excessively or twisted. Do not pull the hose over sharp edges,
since this will invalidate the warranty.
Description
Thermostat with rotary
control switch
1
5