Opening And Closing The Housing - Sea&Sea MDX-D800 Instruction Manual

Opening and Closing the Housing

Opening and closing the housing is done with the locking latches. Here we
will explain how to open and close the locking latches.
Opening the locking latches
1
With the surface of the rear
case facing up, press and hold
the right and left locks ( ) and
remove the locking latches
from the hooks ( )
CAUTION
When removing the locking latches,
be sure to use the tips of your fingers,
not your fingernails.
If you lock the locking latch after it is
removed from the hook, it is easier
to remove the rear case.
E-9
Closing the locking latches
1
Attach the L-hook to the front
case
2
First, put the right and left
locking latches on the hooks
( ) , a n d c l o s e t h e l o c k i n g
latches simultaneously ( )
CAUTION
Before aligning the rear case and front case, make sure there are no specks
of dust, scratches, or deformities on the O-ring and the O-ring contact
surfaces.
Check to make sure that the locking latches are securely locked.
Opening and Closing the Housing
L-hook
E-10