Overview Of The Bc10 Basic Controller; Service Clearances - Worcester GB162-50 User Instructions

Overview of the BC10 basic controller

4 Overview of the BC10 basic controller
11 10
1
2 3
Fig. 1 BC10 basic controller
5

Service Clearances

The boiler must be located in an area with the following service clearances.
Fig. 2 Clearances
Your installer will have provided adequate space around
the boiler for safety and servicing access.
4
9 8 7
4 5 6
6 720 648 727-001.1TD
550 mm
[1] Mains switch (boiler On/Off)
c
[2] "Reset" button (fault reset button)
d
[3] Chimney sweep button (for manual operation)
e
[4] Service button
[5] Service Connector
G
[6] "Burner LED" (On/Off)
R
[7] "Heat demand" LED
[8] Maximum CH (boiler) flow temperature dial
[9] Display (for status indication)
S
[10] "DHW mode" LED
[11] DHW temperature dial
0 mm
CAUTION: Restricted space.
The boiler may overheat.
▶ Do not restrict this space with the addition of
cupboards, shelves etc. next to the boiler.
0 mm
6 720 648 727-002.1TD
6720813172 (2015/04)