How To Assign Or Change User Codes - C&K systems Sierra S5030 Technical Manual

How to Assign or Change User Codes

User codes can be created or
changed as often as you like.
2
Any code you select must be
four digits long. You cannot
use 0000, or assign the same
code to more than one user
number. Avoid codes that are
easy to guess, like 1234. The
default master user code (user
number 1) is 5832. For secu-
rity reasons, be sure to change
this code to a different number.
Do not assign the code 5832
to another user.
Your LED keypad does not dis-
play the user code assigned to
a user number. However, if
your system has an alphanu-
meric or icon keypad, you can
use these keypads to view the
user codes which have been
assigned to the system's users.
If you make a mistake while as-
signing a user code, you may
correct it by repeating the pro-
cedure.
Be sure to record the user
codes, and keep these records
in a safe place.
Technical Manuals Online! - http://www.tech-man.com
8
To Assign or Change
a User Code:
1. Press and hold the
[user prg] key for 2 seconds
until you hear two beeps.
2. Enter the master user
code. Next, enter the 2-digit
user number you wish to
change. To determine the
next available user number,
press the
The zone LEDs light to iden-
tify the next available user
number. Compare the pattern
of lit zone LEDs to the chart
on the next page to determine
the user number.
3. Enter the new 4-digit user
code. The display changes to
indicate the next available
user number.
4. To exit, press and hold the
key for 2 seconds.
key.