How To Turn The Warning Tone On/Off; How To Turn The Chimes On/Off - C&K systems Sierra S5030 Technical Manual

How to Turn the Warning Tone On/Off

You hear a beeping sound
when the system is about to
arm, disarm, or sound an
alarm. The warning tone re-
minds you that time remains to
cancel the arming or disarming
sequence, or to cancel the
alarm.
You can turn the tone on or off
by following the instructions to
the right. If the tone is on, the
action turns it off. If the tone is
off, the action turns it on.

How to Turn the Chimes On/Off

When your system is set to
chime, you hear three beeps
whenever you enter a pro-
tected door or window. You can
turn the chimes on or off by fol-
lowing the instructions to the
right. If the chimes are on, this
action turns them off.
Technical Manuals Online! - http://www.tech-man.com
To Turn Tone On/Off:
1. Press and hold the
[pre-warn] key for 2 seconds
until you hear two beeps. All
of the LEDs blink.
2. Enter the master user code. If
you hear three beeps, the tone
is now on. If you hear one
continuous 3-second beep,
the tone is now off.
To Turn Chime On/Off:
1. Press and hold the
[chime] key for 2 seconds
until you hear two beeps. All
of the LEDs blink.
2. Enter the master user code. If
you hear three beeps, the tone
is now on. If you hear one
continuous 3-second beep,
the tone is now off.
5
35