Table of Contents
Advertisement
Guidance of handling Color TFT LCD Module
Guidance of handling Color TFT LCD Module
System Assembler
7
Do not touch TCP area
•Do not touch TCP area at any case. It
causes Driver IC crack, film crack etc.
•TCP is the weakest point of LCD.
Certainly connect the I/F &
9
B/L connectors.
•Incomplete connection with LCD can
cause burnt in Backlight connector or
damage the interface IC.
•Taping after connecting is highly
recommended.
Keep mounting screw
11
length and motor driver's
torque.
•Strong/Weaken motor driver's torque
can make a mechanical defect on CD.
Please keep the specification.
•The length of mounting screw should
be exactly followed the specification.
LG.Philips LCD Confidential
8
Do not pull Backlight wire
•Please do not pull the Backlight wire
to pick up the LCD, it can cause the
wire disconnected or damaged.
•At lifting the LCM from conveyor belt,
please hold the Case Top area with
both hands.
Handle with care
10
•Please do not drop, bend or hit the
LCD. Physical stress can cause the
defect such as broken.
Do not operate for a long
12
time under the same pattern.
•Operating LCD for a long time under
the same pattern can cause image
persistence and can damage it.
•Please follow following guidance.
1. Turn the power off when do not use.
2. Change the pattern periodically.
Advertisement
Table of Contents
