Table of Contents
Advertisement
SPECIFICATION
tacking time of 5V,18V and 24V.
3.2.8. All of main outputs tracking time should under 20ms
4. PROTECTION:
4.1. Input protection:
The input power line will be fused with a 4A / 250Vac fuse.
4.2. Over voltage protection:
By used a latch mode, the output shall be protected from over voltage fault at all conditions
including open-loop by breakdown that is set to trip as following table.
4.3. Short circuit protection:
The output will withstand a short circuit across the outputs with latch-off function, Output can be
shorted without damage.
Output Voltage
Over voltage protection
Over current protection
4.6. Over current protection:
By auto restart mode,
4.7. Over thermal protection:
MODEL NO. PSM250-405
REVISION
Item
01
CH1
CH2
+5V
+5Vsb
6.5-7
Auto restart
4.5A
1.5A
DATE
2005.03.14
CH3
CH4
+18V
+24V
22.-25.3
27.6-31.2
4.5A
10A
REV: 01
PAGE.
8
Advertisement
Table of Contents
