Guidance of handling Color TFT LCD Module
Guidance of handling Color TFT LCD Module
System Assembler
1
Follow power sequence.
•Abnormal power sequence may cause
critical malfunction or electrical
damage.
•P le ase fo l lo w po we r se quences
described in the specification sheet.
3
Prevent overheat.
•High temperature on the surface of
the screen may cause poor quality.
•Please make LCD used on specified
temperature. Heat from backlight
should be considered.
5
Need EMI solution.
•LCD Module is produced to be EMI
solved. However, system is needed to
be matched for EMI solution.
EMI : Electro-Magnetic Interference
LG.Philips LCD Confidential
Prevent mechanical stress.
2
•Please fix the LCD by screw at the
four mounting holes on the corners.
•Please make LCD free from physical
stress such as bending, twisting,
banging or pressing.
4
Keep LCD dust-free.
•LCD Module is sensitive against dust.
Dust can cause functional and/or
visual defect.
•So, please keep LCD dust-free.
If possible, avoid low temp.
6
operating.
•Low temperature under 10℃ make
LCD respond slowly, make backlight
worse operated and shorten very
much the lifetime accordingly.
•LCD is strongly recommended to be
used at room temperature.