Configuring The Phone's Sip Settings - Ubiquiti UniFi UVP User Manual

Chapter 5: Elastix Configuration

Configuring the Phone's SIP Settings

Before you can configure the UniFi VoIP Phone's SIP settings, perform initial configuration
on the phone by following the instructions in "Initial Configuration" on page 26. Then,
configure the phone's SIP account by following these steps:
1. Press the Settings icon at the bottom left of the Welcome screen to display the Phone
Settings page.
2. Press SIP service.
3. Press SIP accounts.
4. Press Add account. The SIP Settings page is displayed.
5. To complete the phone configuration, fill in the following fields:
• Server
• User name
section of the Add SIP Extensions page in step 3 above).
• Password
Add SIP Extensions page in step 3 above)
• Voicemail number
6. The new account will be displayed on the SIP accounts page.
If the new account was properly configured, Receiving calls will be displayed.
If it was not properly configured, Not connected to server (error: 408) will be displayed.
16
Set this to the IP or hostname of your Elastix PBX.
Set this to the value of the Extension Number field (in the Add Extension
Set this to the value of the secret field in (the Device Options section of the
Set this to *98.
Quick Provisioning Guide
Ubiquiti Networks, Inc.