Installation Of Media Player; Media Player Setup; Seal The Media Player Enclosure - peerless-AV CL-ENCL68 User Manual

Installation Of Media Player

1. Flip the Media Player Enclosure back over
so that it is right side up. Unscrew the 8
screws on the plastic top of the Media Player
Enclosure. Remove the plastic top.

Media Player Setup

1. Plug the Media Player into the power outlet inside the Media Player Enclosure.
2. Connect cables to Media Player.
Sealing The Media Player Enclosure
Note: It is recommended to plug in all electronics
to confi rm power and connections are correct
and Media Player is functioning properly prior to
fi nal closing and mounting of the Media Player
Enclosure.
Note: If mounting the Media Player Enclosure,
completely seal the Enclosure prior to mounting.
1. Realign the plastic top on the Media Player
Enclosure. Reinstall the 8 screws into the
plastic top on the Media Player Enclosure
Note: Ensure that the base plate and plastic top
are reinstalled in the proper orientation.
2. Peel off one sticky side of the 4 Velcro pieces
(provided). Attach the 4 Velcro pieces to the
bottom corners of the Media Player (sold
separately).
3. Place the Media Player where it will be
positioned inside the Media Player Enclosure
and make sure the Media Player will have
enough clearance for wiring.
4. Peel off the other sticky side of the Velcro and
attach the Media Player to the metal base
plate of the Media Player Enclosure. Press
fi rmly for a few seconds.
9 2015-02-05 #:220-9004-1