peerless-AV CL-ENCL68 User Manual page 4

20. In case of product malfunction or unusual events such as electrical burning smell, smoke, or loss
of content signals on TV/Display due to internal overheating, immediately turn off and unplug the
power and contact the manufacturer.
21. Do NOT install the product at such unstable locations as moving objects, constantly vibrating
props, or uneven surfaces. Improper installation may cause products to fall off. Follow mounting
instructions properly for safe operation of the product.
22. Do NOT install the product near any poisonous gas or chemically unstable atmosphere as it may
cause fi re.
23. Do NOT install the product near any strong magnetic or electrical current fi eld. It may cause
fi re, electric shock, or severe damages to the product. The product may not be subject to any
electromagnetic radiation, causing deterioration of content picture quality.
24. Do NOT leave any fi re source, such as candles, close to or on the product as it may be a cause
for fi re or damages to the product.
25. Do NOT move or transport the product with any cables (power cables, content connectivity
cables) plugged in to the source devices. Damages may occur to the cables, plugs, or jointing
connectors of the cables due to forcible bending and stress, which may cause damages to the
waterproof seal of the product, making it subject to fi re, electric shock, or shorted circuit.
26. When unplugging, always grab the plugs of power cords or cables. Improper pulling of the cords
or cables may cause damages to the waterproof seal of the product, making it subject to fi re,
electric shock, or shorted circuit.
27. Do NOT use any other power cords or connection cables than what is provided with the product
or from the manufacturer directly. Use of untested, unauthorized, or substituted power cords or
connection cables may be a cause for malfunction, fi re, electric shock, or severe damages to the
product. Also such use of improper or undesignated power cords or connection cables will void
product warranty.
28. Always leave the Power Off when plugging or unplugging the power cords or connection cables to
avoid electric shock or damages to the product.
29. Do NOT use any chemical such as paint thinner or benzene to clean the product's exterior. It may
cause scratches on the surface, erasing proper indications, identifi cation labels, or instructions on
the exterior, which may be a cause for misuse and improper operation of the product.
4 2015-02-05 #:220-9004-1