Troubleshooting - K-sun BEE3-EZ Operator's Manual

Trouble Shooting- Error Messages
Bar Code
Only one bar code per label is available. See p. 7.
only one?
The batteries have run out. Turn the power off and replace ALL the batteries
Change
with new AA Alkaline batteries. Make sure batteries are inserted with correct
Batteries
polarity. Use the AC adapter that comes with printer to save on batteries.
See p. 8.
The tape cartridge installed will not work in the BEE3®-EZ or BEE3®-EZ+.
Check Tape
Check that the cartridge is installed correctly. See p. 4.
Cartridge!
User has entered too many lines for size of tape. See p. 5 for
Line Over! X
number of lines that can be entered per size of tape. Install a wider tape or
delete some lines.
Memory
There is no available space to save a file. Delete a file. See p.14.
Full
Printer has error printing tape. Turn printer off. Disconnect adapter. Reconnect
Motor Error
adapter and turn printer on. Press Print. If error continues contact your point
of purchase for further action.
You have attempted to call up or delete a file when there are no files saved
No File
on the device. Press any key to return to the text enter screen. See p.14.
The tape cartridge is not installed or not installed correctly. Turn the power
No Tape!
off and reinstall the tape cartridge correctly. See p. 4.
The print head is overheated due to continuous printing. Turn the power off,
Over Heat!
remove the tape cartridge and let the device cool down.
The text does not fit in the set length. Reduce text size or increase length.
Text Long!
31