Cable/Flag - K-sun BEE3-EZ Operator's Manual

Shift
Press Shift + Cable/Flag Key
Screen shows Cable.
Arrow Down for Flag Vertical. (Flag:Vert)
Arrow Down for Flag Horizontal. (Flag: Hori)
Cable
1.
Set Length 2.0" through 5.0" or OFF.
2.
Length is the full length of the label. Base the length on the circumference of object you
are placing the label on. Up to four lines of text are available.
3. Enter up to 4 lines with 4 numbers or letters. See Double Figure p. 28 for entering up to
8 digits.
4. Enter up to 4 lines. Print.
Flag Vertical
1.
Set Length 1.0" to 5.0" or OFF.
2.
Length is the full length of the label. A line will print in half to help guide in placing label
for flagging. Base the length on the circumference of wire plus length of flag needed to
extend past wire.
3. Enter up to 4 numbers or letters per line. See Double Figure p. 28 for entering up to
8 digits.
4.
Enter up to 2 lines. Text will automatically repeat on second section of label.
Flag Horizontal
1. Set Length 2.0" to 5.0" or OFF.
2.
Length is the full length of the label. A line will print in half to help guide in placing label
for flagging. Base the length on the circumference of wire plus length of flag needed to
extend past wire.
3. Enter up to 4 numbers or letters per line. See Double Figure p. 28 for entering up
to 8 digits.
4.
Enter up to 4 lines. Text will automatically repeat on second section of label.
5.
Approximately 40 characters/numbers can be entered and will then be repeated on
second section of label.
Note: To delete "all" when using Cable and Flag features continue to press the backspace key
through the menu and back to line 1.
Note: You cannot save Cable/Flag labels using the File function.

Cable/Flag

Example:
Example:
Example:
Cable/Flag
9