Table of Contents
Advertisement
FYS/PSA
Once in FYS/PSA, the engine doesn't
go into reverse.
When the FYS/PSA enters its last
sequence the bell automatically comes
on.
When FYS/PSA is enabled, pressing
the whistle and bell buttons has no
effect.
I push the direction button but the
next sound clip in the sequence does
not play or the engine does not come
out of FYS/PSA after fourth press of
the direction button.
Lionel Corporation Super 381 Electric Engine
Remedy
So that FYS/PSA effects can be as
realistic as possible, Proto-Sound 2.0
disables the reversing unit whenever
FYS/PSA is enabled. This way the
engine remains still at its stop as the
operator cycles through the
FYS/PSAsequences.
FYS/PSA is programmed to start
ringing the bell at that point. After
approximately 12 seconds it will
automatically turn off.
Because FYS/PSA must control
various effects in each sequence,
Proto-Sound 2.0 takes control of these
sound effects until you exit FYS.
Each FYS/PSA clip must play for
approx. 30 seconds before FYS/PSA
will advance to the next step in the
FYS/PSA cycle. Wait at least 30
seconds in each FYS/PSA sound clip
before pressing the direction button.
16
Advertisement
Table of Contents
