Tip Cleaner - jbc AL-2A User Manual

Tip Cleaner

Improve thermal transfer by cleaning the tip after each solder joint.
Brass Wool
Ref. CL6210
Very effective cleaning method.
It leaves a small layer of
solder on the tip to
prevent oxidation
between cleaning
and rewetting.
Splashguard
It prevents splashing of
solder particles when using
the brass wool.
Wiper
Ref. CL0236
A temperature resistant receptacle lets the
operator remove excess solder by gently
tapping or wiping.
Optional
Inox Wool Metal Brush
Ref. CL6205 Ref. CL6220
14
Sponge
Ref. S0354
The least harmful cleaning method.
Keep the sponge damp with
distilled water when working to
avoid tip wear.
Non-slip base
No need to hold the base
while cleaning tips.
Tapping: Wiping:
Tap gently to remove Use the slots to
excess solder. remove remaining
particles.
Tip-Tinner Sand
Ref. TT-A Ref. CL6211
Accessories
Fume Extractor
Ref. F4468
Optional Guide set
Ref. 0002399 - Ø 0.4 - 0.5 mm
0002402 - Ø 0.6 - 0.8 mm
0002843 - Ø 1.1 - 1.5 mm
0013915 - Ø 1.6 - 1.8 mm
Driver Gear
Ref. 0002863
*Only included in the Ø 1.1 - 1.5 / Ø 1.6 - 1.8
Guide set for a correct dragging of the solder
wire.
w w w.jbctools.com
Support
Ref. AL-IA
15