Control Screen - jbc AL-2A User Manual

5. Connect the handpiece to the station and switch it on. With the handpiece out of the stand, press
the WIRE LOAD key till the solder leaves by the end of the guide tube.
LOADING
SOLDER WIRE
Clutch Regulation
A.
Adjust the dragging strength
to allow the forwarding of the
solder wire and to avoid stall
and or clogging situations when
any cause arises
+
B.
Tighten the dragging
mechanism
6
Fast wire
dragging
Solder wire dragging button
-
A
+
B
-

Control Screen

Tool temperature
TEMP.
disc. L 10 S 11
Working method
There are 4 tool status:
USE (Use). The tool is ready to work.
STD (Stand). The tool is placed in the stand but still not in the sleep mode.
SLP (Sleep). The tool is in the sleep mode in the stand, its temperature has dropped till the sleep temperature.
OL. The power circuit is overheated. The power is temporarily not supplied.
w w w.jbctools.com
Tool status
230ºC USE
Length of Speed
wire
7