Specifications - Hitachi WH 9DMR Handling Instructions Manual

10. Always charge the battery at a temperature of 0
– 40°C.
A temperature of less than 0°C will result in over
charging which is dangerous. The battery cannot
be charged at a temperature greater than 40°C.
The most suitable temperature for charging is that
of 20 – 25°C.
11. Do not use the charger continuously.
When one charging is completed, leave the charger
for about 15 minutes before the next charging of
battery.
12. Do not allow foreign matter to enter the hole for
connecting the rechargeable battery.
13. Never disassemble the rechargeable battery and
charger.

SPECIFICATIONS

Cordless Impact Driver
Model
Voltage
No-Load speed
Capacity (Ordinary bolt)
Tightening torque
(Maximum)
2.0 Ah
Rechargeable
2.6 Ah
battery
3.0 Ah
Weight
Cordless Impact Wrench
Model
Voltage
No-Load speed
Capacity (Ordinary bolt)
Tightening torque
(Maximum)
2.0 Ah
Rechargeable
2.6 Ah
battery
3.0 Ah
Weight
Charger
Model
Charging voltage
2.0 Ah
Charging time 2.6 Ah
3.0 Ah
Weight
All charge times are approximate. Actual charge time may vary.
"x" Indicates that the battery pack is not compatible with that specific charger.
WH9DMR
9.6 V
M5-M12
105 N·m
EB9B: Ni-Cd EB1220BL: Ni-Cd
EB926H: Ni-MH EB1226HL: Ni-MH
EB930H: Ni-MH EB1230HL: Ni-MH
1.4 kg
WR9DMR
9.6 V
M6-M14
115 N·m
EB9B: Ni-Cd EB1220BL: Ni-Cd
EB926H: Ni-MH EB1226HL: Ni-MH
EB930H: Ni-MH EB1230HL: Ni-MH
1.4 kg
UC14YFA
7.2 – 14.4 V
50 min.
65 min.
70 min.
0.6 kg
14. Never short-circuit the rechargeable battery.
Short-circuiting the battery will cause a great
electric current and overheat. It results in burn or
damage to the battery.
15. Do not dispose of the battery in fire.
If the battery burnt, it may explode.
16. Do not insert object into the air ventilation slots
of the charger.
Inserting metal objects or inflammables into the
charger air ventilation slots will result in electrical
shock hazard or damaged charger.
17. Bring the battery to the shop from which it was
purchased as soon as the post-charging battery
life becomes too short for practical use. Do not
dispose of the exhausted battery.
18. Using an exhausted battery will damage the
charger.
WH12DMR WH14DMR
12 V
-1
0 – 2600 min
130 N·m 140 N·m
EB14B: Ni-Cd
EB1426H: Ni-MH
EB1430H: Ni-MH
1.6 kg
WR12DMR WR14DMR
12 V
0 – 2600 min -1
160 N·m 200 N·m
EB14B: Ni-Cd
EB1426H: Ni-MH
EB1430H: Ni-MH
1.6 kg
UC24YFA UC18YGH
7.2 – 24 V 7.2 – 18 V
50 min. 50 min.
65 min. 65 min.
70 min. 70 min.
0.6 kg
WH18DMR
14.4 V 18 V
M6-M14
150 N·m
EB1820L: Ni-Cd
EB1826HL: Ni-MH
EB1830HL: Ni-MH
1.8 kg 2.0 kg
WR18DMR
14.4 V 18 V
M10-M16
220 N·m
EB1820L: Ni-Cd
EB1826HL: Ni-MH
EB1830HL: Ni-MH
1.8 kg 2.0 kg
UC18YG
7.2 – 18 V
50 min.
0.35 kg 0.3 kg
English
x
x
6