Unblock The Traffic Meter After The Traffic Limit Is Reached; Manage The Modem Router Remotely - NETGEAR Nighthawk X4S D7800 User Manual

Nighthawk X4S AC2600 WiFi VDSL/ADSL Modem Router Model D7800
• Disconnect and disable the Internet connection. This setting is optional. When the traffic limit is reached,
the Internet connection is disconnected and disabled.
11. Click the Apply button.
Your settings are saved and the modem router restarts.
The Internet Traffic Statistics section helps you to monitor the data traffic. For more information, see
Internet Traffic Volume and Statistics

Unblock the Traffic Meter After the Traffic Limit Is Reached

If you configured the traffic meter to disconnect and disable the Internet connection after the traffic limit is reached,
you cannot access the Internet until you unblock the traffic meter.
CAUTION:
If your ISP set a traffic limit, your ISP might charge you for the overage traffic.
To unblock the traffic meter:
1. Launch a web browser from a computer or WiFi device that is connected to the network.
2. Enter http://www.routerlogin.net.
A login window opens.
3. Enter the modem router user name and password.
The user name is admin. The default password is password. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Advanced Setup > Traffic Meter.
The Traffic Meter page displays.
5. In the Traffic Control section, clear the Disconnect and disable the Internet connection check box.
6. Click the Apply button.
Your settings are saved and the modem router restarts.

Manage the Modem Router Remotely

The remote management feature lets you access your modem router securely over the Internet to view or change
its settings.You must know the modem router's WAN IP address to use this feature. For information about a different
on page 238.
Manage the Modem Router and Monitor the Traffic
243
View the