NETGEAR Nighthawk X4S D7800 User Manual page 226

Ac2600 wifi vdsl/adsl modem router
Hide thumbs Also See for Nighthawk X4S D7800:
Table of Contents

Advertisement

Nighthawk X4S AC2600 WiFi VDSL/ADSL Modem Router Model D7800
Field
Router Information
Hardware Version
Firmware Version
GUI Language Version
Operation Mode
LAN Port
The settings of the LAN port. For information about how to configure the LAN settings, see
LAN IP Address Settings
on page 205 and
MAC Address
IP Address
DHCP
Internet Port
The settings of Internet port. The Internet connection can run through the ADSL port with DSL service or through the WAN
Ethernet port with cable or fiber service. For information about how to configure the Internet settings, see one of the following
sections:
Set Up Your Modem Router for DSL Service
Set Up the Modem Router for Cable or Fiber Service
Manually Set Up an ADSL Internet Connection
Manually Set Up a VDSL Internet Connection
Manually Set Up a Cable or Fiber Internet Connection
MAC Address
IP Address
Manage the Modem Router and Monitor the Traffic
Description
The modem router model.
The version of the modem router firmware. If you upgrade the firmware on the modem
router, the version changes.
The version of the modem router language for its web pages. If you upgrade the firmware
on modem router, the language version might change too.
The operation mode (Router or AP Mode) of the modem router. For information about
how to change the operation mode, see
Point Only
on page 252.
Disable the Built-In DHCP Server
The Media Access Control (MAC) address. This address is the unique physical address
that is assigned to the Ethernet LAN port.
The IP address that the Ethernet LAN port uses. The default IP address is 192.168.1.1.
Displays whether the DHCP server of the modem router is enabled for devices that are
attached to the LAN.
on page 24
on page 32
on page 50
on page 59
on page 68
The Media Access Control (MAC) address. This address is the unique physical address
that is assigned to the Internet port.
The IP address that the Internet port uses. If this field does not display an address or
displays 0.0.0.0 as the address, the modem router is not connected to the Internet.
226
Set Up the Modem Router as a WiFi Access
Manage the Modem Router's
on page 210.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents