NETGEAR Nighthawk X4S D7800 User Manual page 185

Nighthawk X4S AC2600 WiFi VDSL/ADSL Modem Router Model D7800
After the InstallShield Wizard completes the installation, the NETGEAR USB Control Center prompts you to
select a language.
4. Select a language from the menu and click the OK button.
Some firewall software, such as Comodo, blocks NETGEAR USB Control Center from accessing the USB printer.
If you do not see the USB printer displayed onscreen, you can disable the firewall temporarily to allow the utility
to work.
5. Select the printer and click the Connect button.
The printer status changes to Manually connected by Mycomputer. Now only the computer that you are using
can use this printer.
6. Click the Disconnect button.
The status changes to Available. Now all computers on the network can use the printer.
7. To exit the utility, select System > Exit.
Share a USB Printer
185