Install Openvpn Software On A Mac Computer - NETGEAR Nighthawk X4S D7800 User Manual

Nighthawk X4S AC2600 WiFi VDSL/ADSL Modem Router Model D7800
The window displays the progress of the installation and then displays the final installation window.
16. Click the Finish button.
17. Unzip the configuration files that you downloaded in Step 6 and copy them to the folder in which the OpenVPN
client utility is installed on your computer.
If your device is a Windows 64-bit system, the OpenVPN client utility is installed by default in the
files\OpenVPN\config\
18. Modify the VPN interface name to NETGEAR-VPN:
a. In Windows, select Start > Control Panel > Network and Internet > Network Connections (or Network
and Sharing Center).
The network information displays.
b. In the local area connection list, find the local area connection with the device name TAP-Windows Adapter.
c. Select the local area connection and change its name (not its device name) to NETGEAR-VPN.
If you do not change the VPN interface name, the VPN tunnel connection will fail.
For more information about using OpenVPN on a Windows computer, visit
openvpn.net/index.php/open-source/documentation/howto.html#quick.

Install OpenVPN Software on a Mac Computer

You must install Open VPN software on each computer that you plan to use for VPN connections to your modem
router.
To install VPN client software on a Mac computer:
1. Launch a web browser from a computer or WiFi device that is connected to the network.
2. Enter http://www.routerlogin.net.
folder.
Use VPN to Access Your Network
261
C:\Program