Manually Set Up A Vdsl Internet Connection; Specify A Vdsl Connection Without A Login - NETGEAR Nighthawk X4S D7800 User Manual

Nighthawk X4S AC2600 WiFi VDSL/ADSL Modem Router Model D7800
Field
Use Computer MAC Address
Use This MAC Address
12. Click the Apply button.
Your settings are saved.
13. Click the Test button to test your Internet connection.
If the NETGEAR website does not display within one minute, see
286.

Manually Set Up a VDSL Internet Connection

You can view or change the modem router's VDSL Internet connection settings manually. The following sections
describe the options that are available to you to manually set up the VDSL Internet connection:
•

Specify a VDSL Connection Without a Login

• Specify a VDSL Connection With a Login and PPPoE Service
Note Some ISPs require that you register on their website before you can obtain Internet service.
Follow the directions that your ISP gave you.
Specify a VDSL Connection Without a Login
If you want to manually configure the VDSL connection settings, use the information that your ISP gave you to
connect to your Internet service. If you cannot find this information, contact your ISP. Entering incorrect information
might prevent the modem router from connecting to the Internet.
Note Some ISPs support two virtual interfaces: one Internet virtual interface and one IPTV virtual
interface. Before you specify the settings for the IPTV interface, first use the following
procedure to specify the settings for the Internet interface. Then repeat the procedure to
specify the settings for the IPTV interface. While doing so, follow the directions that your ISP
gave you.
Description
The modem router captures and uses the MAC address of the computer that you
are now using. You must use the one computer that is registered by the ISP.
Enter the MAC address that you want to use. By default, the field displays the MAC
address of the Internet port.
on page 59
Manage the Internet Settings Manually
59
Troubleshoot the Internet Connection
on page 64
on page