Lamp Replacement - Cover For Main; Dipped Beam Bulbs; Lamp Replacement - Dipped Beam - Volvo V40 Cross Country Owner's Manual

5.
Press down the catch.
Unplug the connector.
Place the headlight on a soft surface so
as not to scratch the lens.
IMPORTANT
Do not pull the electrical cable, only the
connector.
6. Replace the relevant bulb as instructed.
The headlamp must be fitted and the contact
fitted correctly before switching on the lights
or changing key position.
Related information
•
Lamp replacement - general (p. 359)
•
Lamp replacement - location of front
lamps (p. 360)
•

Lamp replacement - cover for main/

dipped beam bulbs (p. 361)
•
Lamps - specifications (p. 365)
Lamp replacement - cover for main/

dipped beam bulbs

Main/dipped beam bulbs are accessed by
releasing the headlamp's larger cover.
1.
Press the hooks together.
Angle out the cover.
2. Replace the relevant bulb as instructed.
Related information
•
Lamp replacement - headlamps (p. 360)
•

Lamp replacement - dipped beam

(p. 361)
•
Lamp replacement - main beam (p. 362)
•
Lamp replacement - extra main beam
(p. 362)
10 Maintenance and service
Lamp replacement - dipped beam
The dipped beam bulb is fitted inside the
headlamp's larger cover.
NOTE
Applies to cars with halogen headlamps.
1. Detach the headlamp (p. 360).
2. Undo the cover (p. 361).
3.
Press the bulb holder upwards until it
releases.
Pull out the bulb holder.
4. Replace the bulb and put back the parts
in reverse order.
Related information
•
Lamps - specifications (p. 365)
10
361