And Standby Mode - Volvo V40 Cross Country Owner's Manual

07 Driver support
||
NOTE
Cruise Control cannot be enabled at
speeds below 30 km/h.
Changing the stored speed
Stored speed is changed with short or long
presses on the or
ton.
To adjust +/- 5 km/h:
•
Use short presses - each press gives
+/- 5 km/h.
To adjust +/- 1 km/h:
•
Hold down the button and release it at
the required speed.
Last press made is stored in the memory.
If speed is increased using the accelerator
pedal prior to pressing the
then it is the car's current speed when the
button is pressed that is stored.
A temporary increase in speed with the accel-
erator pedal, e.g. during overtaking, does not
affect the cruise control setting - the car
07
returns to the last stored speed when the
accelerator pedal is released.
A Volvo dealer has updated information about what applies in each respective market.
6
*
196
Option/accessory, for more information, see Introduction.
If any of the Cruise Control buttons are
held depressed for several minutes then it
is blocked and deactivated. To be able to
reactivate Cruise Control, the car must be
stopped and the engine restarted.
Related information
steering wheel but-
•
Cruise control* (p. 194)
/ button,
NOTE
Cruise control* temporary
deactivation and standby mode
The function can be temporarily deactivated
and set in standby mode.
Temporary deactivation - standby mode
The steering wheel buttons and display in cars
without speed limiter 6 .